Before the site visit

What might your project cost?

Get an idea of what to expect, then we’ll visit your home and talk through the right plan.

A starting budget to help you know what to expect. Planning ranges reflect our internal cost assumptions for equipment, materials, labor and installation requirements. These are preliminary illustrations, not firm estimates or quotes. An in-home consultation and room-by-room load calculation are required. Your final proposal may be outside the range; square footage alone does not select equipment.

1. Your space

Mitsubishi Electric mini-splits, with room-by-room planning.

A single zone serves one space. Closed bedrooms may need their own delivery plan.
Zones describe the layout, not the equipment size.
Head style changes the modeled allowance. Mixed layouts assume about half the heads use an upgraded style. Ceiling cassettes need a framing check; uneven joist spacing in older Philly homes may limit suitable locations. EZ FIT requires a flat, level mounting surface and cannot be installed directly in a sloped ceiling.

Compare single-zone equipment

Choose a series and heating option, then compare the available nominal capacity classes. This is a budget comparison, not an equipment-sizing recommendation.

GX Premier offers standard and Hyper-Heating pairings. FX Deluxe already includes Hyper-Heating.
Only manufacturer-listed single-zone pairings are available for each indoor series.
Nominal size is a model class, not a promise of heating output. We confirm capacity with room-by-room heating and cooling loads and the exact equipment match. Bigger is not automatically better.
Capacity, Deluxe and Hyper-Heating price differences are provisional test allowances awaiting calibration. FX Deluxe includes Hyper-Heating once. Manufacturer-listed choices do not confirm local stock.

Official Mitsubishi information: GX Premier · FX Deluxe · EZ FIT · Current catalog

For a rowhome or custom-style example, primary heat adds a provisional reserve. A catalog-selected single-zone system already includes its chosen equipment allowance; its heating suitability still needs an in-home design.

2. Installation details

These are the parts of a Philly job that can change the budget.

Short routes are in the baseline. Longer or limited concealed routes add provisional allowances.
An electrician must verify capacity and code requirements. The upgrade setting is a limited panel-work reserve; new utility service is excluded.
The pump setting allows for one pump. We’ll verify the route and any additional drainage needs at home.
What does the baseline assume?

The base-system illustration assumes selected Mitsubishi equipment, ordinary installation labor, accessible line sets, ordinary mounting, gravity drainage, and startup. Permits and ordinary installation details still need to be confirmed in the written scope. Selected electrical, routing, access, removal, and drainage allowances are shown in the breakdown.

The rowhome setting is a two-story brick-home example. Three zones might mean one downstairs comfort area and two upstairs rooms; that is not a claim about the average home or a guarantee of whole-home coverage. The tool does not establish capacity, outdoor-unit count, or final head locations.

What needs a separate allowance?
  • Utility service increases, meter/service-lateral work, and major rewiring
  • Crane work, major roof work, structural work, and unusual rigging
  • Major plaster, drywall, painting, cabinetry, or historic-district work
  • Hazardous-material abatement, concealed damage, and unrelated repairs
  • Special permit, inspection, or engineering requirements

The result includes the selected test allowances. Work outside their limits is listed below the result and still needs a separate scope.

Your answers stay in this page and are not saved or sent by the calculator. Booking and chat use Comfy’s existing Housecall Pro service. Consultations are for Philadelphia and selected Pennsylvania suburbs; we do not service New Jersey.

Why an in-home consultation?

  1. We walk the home and listen to what isn’t comfortable.
  2. We check heat loss, cooling load, airflow, access, and utilities.
  3. We explain a specific design, scope, and written price.

Understand the options first.

A room-by-room mini-split and a ducted hybrid system solve different problems. The right starting point is how your home works today.

Explore the system guides
About these experimental prices

Broad installed-project allowances prepared for this test prototype. These have not been calibrated to Comfy’s actual job pricing.

Equipment, layout, local labor, permits, and access can move the result. The planner does not display customer identities, project records, internal costs, or margins.